VYR-6111 Metal Flange Hydraulic Valve

VYR-6111 Metal Flange Hydraulic Valve

Metal hydraulic valves for full flow through elbows and straight sections

Get more information from your nearest distributor

Contact us now

Models

HYDRAULIC THREAD VALVE 1"

  • Weight: 23000 gr.
  • Units per box: 1
  • Weight per box: 23 kg.

HYDRAULIC SLOT VALVE 3"

  • Weight: 19000 gr.
  • Units per box: 1
  • Weight per box: 19 kg.

VÁLVULA HIDRÁULICA METAL 3" BÁSICA BRIDA

  • Weight: 19100 gr.

VÁLVULA HIDRÁULICA METAL 4" BÁSICA BRIDA CODO

  • Weight: 25000 gr.
  • Units per box: 1
  • Weight per box: 25 kg.

VÁLVULA HIDRÁULICA METAL 5" BÁSICA BRIDA CODO

  • Weight: 29000 gr.
  • Units per box: 1
  • Weight per box: 29 kg.

VÁLVULA HIDRÁULICA METAL 6" BÁSICA BRIDA CODO

  • Weight: 52000 gr.
  • Units per box: 1
  • Weight per box: 52 kg.

VÁLVULA HIDRÁULICA METAL 8" BÁSICA BRIDA CODO

  • Weight: 84000 gr.
  • Units per box: 1
  • Weight per box: 84 kg.

VÁLVULA HIDRÁULICA METAL 10" BÁSICA BRIDA CODO

  • Weight: 105000 gr.
  • Units per box: 1
  • Weight per box: 105 kg.

VÁLVULA HIDRÁULICA METAL 12" BÁSICA BRIDA CODO

  • Weight: 140000 gr.
  • Units per box: 1
  • Weight per box: 140 kg.

Specifications

No information available

Dimensions

No information available

Applications

  • Agricultural irrigation, sports facilities, golf courses, urban and commercial areas.
  • Industrial use for fluid control.
  • Drip irrigation and greenhouses.

Features

  • Metal hydraulic valves for full flow through elbows and straight sections.
  • - THREAD:  1", 2", 2 1/2" y 3"
  • - SLOT: 3", 4" y 6"
  • Body and cover made of high quality cast iron.
  • EPDM diaphragms reinforced with fabric.
  • Always clean because of its brass filter with steel mesh built into all assemblies.
  • Assembled with screws and stainless steel spring.
  • SEE ASSEMBLY OPTIONS IN THE TABLE.
  • Working temperature between 2 and 80 degrees.
  • Recommended working pressure of 1 to 12 bar.
  • Opening and closing response time of 0.7 seconds.
  • Resistance test carried out for 25,000 cycles at 15 bar and 80 degrees.
  • Flow range between 38 and 240 l/min.
  • Removable from the upper section for repair or replacement of parts.
  • Complies with standard UNE 68-074-86/ISO 7714.

This product is not downloaded available